4 Tips for Preparing Your Building for Spring

12/31/2018 (Permalink)

Many commercial building owners think that just because temperatures outside get warmer, the potential hazards of winter pass. A spring thaw can easily cause flooding in your building in Fishers Landing East, WA, however, if you are not prepared. Make sure your building is ready from the bottom to the top for those April showers.

1. Basement Preparation

The basement or lowest floor of your building is susceptible to a spring flood as soon as winter snow and ice start melting. In addition to taking the appropriate measures to keep water out, such as having your foundation inspected, you should also complete and check the following items off your list:

• Purchase an automatic sump pump
• Install flood sensors
• Elevate sensitive machinery off the floor

2. Plumbing Protection

A frozen pipe can burst even when it starts warming back up. If the temperature change is too sudden, the pipes may not be able to withstand the contrast. Keep the thermostat in your building set to at least 55 degrees all the time so that your pipes are still kept safe overnight.

3. Roof Inspection

The beginning of spring is a great time to have your roof professionally inspected. Contractors can identify damage and other weak spots, and water restoration specialists can remediate any flooding that occurred during the winter.

4. Drainage Clearing

Falling leaves and twigs that get blown into gutter and downspouts during the winter need to be cleared out before spring rains begin. When a spout is clogged, rain must find another path off the building, and it is usually not the path you would prefer. Clean your drainage system completely so that rainwater has somewhere to go.

When you see ice and snow melting, you know it’s time to prepare your building for warmer weather. Following these tips can help ensure a smooth transition from winter to spring and keep your building from flooding.